Schedule Your Consultation Today

Plattsburg MO Faux Painting

Our faux finishing  process in Plattsburg, MO  starts with your in home consultation as we’ll go over colors, schemes, and design options. Next you’ll receive a detailed estimate breaking down all the aspects of your faux finishing project and decorative finishes. Once approved another meeting will be scheduled to finalize the colors, project workspace break-down and get your project scheduled.

. During faux painting process, all furniture and flooring is removed or covered for protection against paint splatters or drips.  Before one splash of paint is added for your faux painting project your walls are inspected for nail holes and dings filling noticeable imperfections. Most faux finishing process offers very little dust as every attempt is made for a painless and fun transition. Once the finish coating is applied and dried any curtains and/or blinds are reinstalled and aligned. Final inspections are performed and proceeded by a full clean up of the project areas. Offering faux painting and faux staining your sure to get the finishing look you want . If your looking for faux finishing and specialty painting in Plattsburg MO, give us a call today.
southwest texture
Venetian plaster design
antiqued copper fireplace
metallic faux finishes

Plattsburg Faux Painting and Decorative Finishes

Faux Finishing Process
  • The floor is protected in high grade tarps
  • Furniture is protected with water resistant covers
  • Surface is inspected for imperfections
  • The decorative finish is applied.
  • A final walk through is performed 
  • Full clean up
  • Tools are packed away.
  • You get a 7 day, no questions asked, grace period to look over your new finish for any deemed imperfections in the finish.  You'll receive a convenient time for a return touch up visit.
Preparations and products are absolute key to a long lasting finish that you can be proud of. 
 Our process is virtually dust free and as Eco-friendly as we can at this time.  

  • The process starts with removing all wall hangings, curtains, and furniture moved back to a minimum of three feet from the walls or surfaces to be finished. 
  • Your flooring and all remaining furniture is protected using high grade tarps and water resistant coverings.
  • Next, to inspect and address the walls and/or surfaces to be finished filling in any dings and nail holes. 
  • The decorative finish is then applied. Depending on the finish, this could be multiple layers and days to complete.
  • A final walk-through is performed looking for unintended imperfections and cut lines.
  • A final clean-up and furniture returned to it's original positioning is completed.
Additional options include:  Textures & Designer Effects
Additional questions?  See our FAQ's

CABINET REFINISHING

From old world designs to rich modern finishes you'll get the look you've always wanted at a fraction of the cost than replacing your cabinets. 
Preparations and products are absolute key to a long lasting finish that you can be proud of. 

 Our process is virtually dust free and as Eco-friendly as we can at this time.  

  • The process starts with removing hardware and getting rid of all the old grease and dirt that has built up over the years along with deglossing for better adhesion.  
  • Next, all of the exterior seams are filled and smoothed with high quality adhesive caulk.
  • From there we are now ready to apply the primer. The doors and drawers are sprayed as the exterior base units are rolled and tipped using a fine finish mohair roller and self leveling primer. Once checked for imperfections the top coat is applied and another inspection of the finish. 
  • For our decorative finishes the glaze is now applied in the desired effects from a stream line clean finish to aged, weathered, distressed, or old world antiqued.
  • Important for the finish is the protective clear coating. This not only gives the cabinets a consistent finish but also protects from stains and scratches.
  • The hardware is then reinstalled, which is a good time to have new hardware, and the doors are properly adjusted.
  • Additional options include: Molding Installation & Knob Relocation

Additional questions? See our FAQ's